It has taken me a couple of days to get back to this due to illness and other priorities (I know what kind of nerd am I when I allow other things to take priority). Anyway, I was left trying to discover a way to use the automatic recovery process with a backup file that was on a hard disk and not a virtual disk.
The approach that I finally took was that I just restored a new Windows Server 2003 image, shared the drive that had the back up and copied the back up to a virtual drive. I did not want to do a normal restore from the backup because I wanted to make sure that I restored the system state and all that as well. So I changed the virtual server's bios to boot off of a CD and started the install again though this time I was able to go through the normal restore process and find the backup. The problem that I ran into next was that somehow my backup file became corrupted and I kept getting the message that there are miscelaneous characters in the back file and the process could not proceed (or something to that effect). So I was left with rebuilding the server from scratch. Luckily all the important data was stored on a secondary drive and was not lost.
My next venture that I started was to create a new Ubuntu Server from scratch. I am not a Linux expert and it has been a very long time since I went through my Linux courses in college so this will be an experience.
So I downloaded the Ubuntu Server ISO from ubuntu.com. Once it was fully downloaded I then created a small 8gb virtual machine and started it using the ISO as the cd drive. The install went very smooth. No errors or questions that I did not know the answer to.
Next you will see what a Windows tool I am. I got done with the install and the server was just staring at me with a command prompt. I felt very out of my element so I jumped on-line to find out how to launch one of the GUIs that I am sure is available for it. There is a GNOME and a KDE interface available though there seemed to be some concern with security holes when using these. now this is just a play environment so I am not as concerned about security since it will not be outside of my firewall though I decided to follow the advice of many and not load a GUI. I did find quite a few people recommending a website called webmin. Being a web developer, my interest was piqued. I did a search and found a post that someone provided on how to install Webmin (click here). The instructions were great. I did not have any issues and everything installed with out any issues, which is impressive since I really do not know what I am doing in Linux (I know a few things but it has been a long while).
Now that this piece was done I needed to setup the server so that the IP address was not determined by DHCP and that there was an entry in my AD DNS so that I could easily get to the website without having to remember the IP address. I found a good tutorial on how to edit the IP address information (click here). Then I added the CName reference in DNS on my AD server. I then browsed to the website for teh first time and was pretty impressed by what this admin application offered. They were not boasting when they said that there was no need for a GUI and anything you needed to do from a visual perspective was handled by this app. I know that all the hard-core Linux persons probably would not look at this since they love their console, though for me this was a wonderful compromise. Now the default theme was not to my liking though I did find one that I did like and went with that.
My next eperiament is to try to install a new web application that I have recently become aware of that looks very interesting. The application is an open source portal called Liferay. I saw a demo of it the other day and was very impressed by what it can do.
As is my want for most new installs I went on-line and found a website that had some instructions on how to install Liferay on a Ubuntu server (click here). In the instructions they have a shell script that you can download and run. I downloaded it and then uploaded it to the server via my Webmin site, configured it to run as an app and then executed it.
One of the steps in the process involved installing Postfix. This is a mail handling application. I was not sure what some of the options were. I did a search on-line and that did not help much so I kind of guessed. I have an Exchange 2003 environment on my small business server and I wanted to link this up to that. So I selected the "Internet with Smart Host" option which then prompted me to enter the domain and SMTP info for my email server (I am assuming that I selected the right option since based upon these options). So far no errors.
Next I went through the steps to download the files and setup mysql in preperation for the liferay install. No issues with any of those steps thoughI came to find out that the base Ubuntu install does not have a the "unzip" utility installed. Not a big problem. Once I installed it I did not have any issues.
I completed everything in the script and then I switched back to my admin account (it is not good to do too mcuh with the root account) and disabled my root account again.
There were a few more steps on the instructions that needed to be followed after the script was completed. I got to the point where it was time to start the liferay web application and I get an error telling me that I need to set either the JAVA_HOME or JRE_HOME environment variables in order to run this program. I added the entry into the files ~/.bashrc, /etc/bash.bashrc, ~/.profile for the root user as well as my admin account and the process still would not start. I then added the JAVA_HOME entry from the instructions into the start.sh script (which I know is not optimal) and the process started. I am not sure what I was doing wrong though it is working now.
Well, something went wrong. The liferay page displayed once, but is no longer displaying. I am getting a PHP error. I will revisit this later when I have time.
Showing posts with label VMWare ESXi 4. Show all posts
Showing posts with label VMWare ESXi 4. Show all posts
Friday, October 2, 2009
Saturday, September 26, 2009
Venturing into the world of Virtualization Day 2
Day 1
Well today starts day two of this venture. I opened the client again and was prompted that this is an eval version and that I have 30 days left. This confused me a bit since when I registered on the website I got the impression that this was their free application which would make one assume that this was no evaluation. Also, I received a license key for the software but cannot find anywhere in the client to enter the key. I am not done with the install guide so maybe that part is somewhere down the line though I think that this is the first annoying encounter with the client application.
Now on to contiue the setup. I found the next annoying thing with the client and that is that the setup guide has instructions that either do not fit with this version or something was missed since I do not have any options in my "basic tasks" section of the "getting started" tab in the application. In order to download some appliances I had to go to the menu option file->va marketplace and then click on the link for Virtual Appliances. A round about way of getting what I wanted though a pain all together.
An interesting thing just happened. I have been browsing through what is in the client, and I am not sure what I did but now the options that I mentioned before in the "basic tasks" are now available. I am not sure what I did to make them available but they are there now.
I was able to download an appliance and upload the files though it seems that the wizard does not work with the free version of ESXi. You have to download the files onto your machine and then go to the "summary" tab in vSphere Client, right click on the data store that you want the files on and select "Browse Datastore", click the icon on the toolbar to upload the files, and then browse to the files that you are interested it. Not too difficult though the process could have been conceived better.
Now that I had done that it was time to try to rebuild my dead server from the last backup that I ran. This posed to be a bit of a problem. The back up that I have is a BAK file on a usb external hard drive. I was able to create a new Windows appliance with all the drives that would be the same size as the physical server had, I was able to start it and using my windows 2003 server CD, and the auto recovery disk start the process of the recovery. The problem lies in that I cannot find a way to either connect this USB drive to the server to be recognized as a drive or to create an image of the drive and convert it to a virtual drive (vmdk file). Supposedly there is a utility that can help me though I cannot find it. I did a lot of digging around online and I am having trouble trying to find anything useful. There are a lot of command line utils that people have suggested though most seem to be on linux. I saw one posting that talked about mounting the drive using a command line util to the ESXi server though I could not figure out how to make that work. I need to stop playing with this today and take care of some other things so there will need to be a day 3 and maybe 4 or 5 of this process. Either that or scrapping VMWare to try out XenServer which I hear has a much easier admin interface to work with.
So long for today.
Well today starts day two of this venture. I opened the client again and was prompted that this is an eval version and that I have 30 days left. This confused me a bit since when I registered on the website I got the impression that this was their free application which would make one assume that this was no evaluation. Also, I received a license key for the software but cannot find anywhere in the client to enter the key. I am not done with the install guide so maybe that part is somewhere down the line though I think that this is the first annoying encounter with the client application.
Now on to contiue the setup. I found the next annoying thing with the client and that is that the setup guide has instructions that either do not fit with this version or something was missed since I do not have any options in my "basic tasks" section of the "getting started" tab in the application. In order to download some appliances I had to go to the menu option file->va marketplace and then click on the link for Virtual Appliances. A round about way of getting what I wanted though a pain all together.
An interesting thing just happened. I have been browsing through what is in the client, and I am not sure what I did but now the options that I mentioned before in the "basic tasks" are now available. I am not sure what I did to make them available but they are there now.
I was able to download an appliance and upload the files though it seems that the wizard does not work with the free version of ESXi. You have to download the files onto your machine and then go to the "summary" tab in vSphere Client, right click on the data store that you want the files on and select "Browse Datastore", click the icon on the toolbar to upload the files, and then browse to the files that you are interested it. Not too difficult though the process could have been conceived better.
Now that I had done that it was time to try to rebuild my dead server from the last backup that I ran. This posed to be a bit of a problem. The back up that I have is a BAK file on a usb external hard drive. I was able to create a new Windows appliance with all the drives that would be the same size as the physical server had, I was able to start it and using my windows 2003 server CD, and the auto recovery disk start the process of the recovery. The problem lies in that I cannot find a way to either connect this USB drive to the server to be recognized as a drive or to create an image of the drive and convert it to a virtual drive (vmdk file). Supposedly there is a utility that can help me though I cannot find it. I did a lot of digging around online and I am having trouble trying to find anything useful. There are a lot of command line utils that people have suggested though most seem to be on linux. I saw one posting that talked about mounting the drive using a command line util to the ESXi server though I could not figure out how to make that work. I need to stop playing with this today and take care of some other things so there will need to be a day 3 and maybe 4 or 5 of this process. Either that or scrapping VMWare to try out XenServer which I hear has a much easier admin interface to work with.
So long for today.
Friday, September 25, 2009
Venturing into the world of Virtualization Day 1
Recently one of my servers at home died. It is a big pain when something that you rely on is suddenly gone. Well, I had two options; one to buy the parts I think I need to fix the server though do not really know if that will do the job, two purchase a different server.
Right now money is a little tight so I have been putting this decision off though things have been starting to get a little difficult in trying to access files that I need and having our desktop computers talk to each other and such. So I started looking around ebay and craig's list and I put together a list of potentials. Based upon features and I will admit company trust I purchased a slightly used HP DL145 G2 server. It has Two dual core opteron 2.2 ghz processors, 4 gb of memory and 1 tb of disk space. It only took 3 days for it to gether here. In fact it arrived this afternoon. Needless to say my I was a bit excited (I know I am a nerd).
Well, one of the decisions that I made when purchasing this server was that I would consolidate the two servers that I have (one working and the other not working) into one server using virtualization. I am a bit of a novice when it comes to this technology though we use it quite a bit at work. Since we use VMWare ESX as work I was leaning towards that solution though I hear XenServer is also very good (MS HyperVisor is still too new for me to want to deal with it). So after work today I downloaded ESXi 4, burned it to a disk and off I went.
After a couple of hours of frustration on why I could not get the thing working I started doing some research and playing around (I am not one to call it quites, I have to know why it was not working). Anyway, I came to find out that the server I bought is not on the hardware compatibility list for VMWare. If I had know that in the first place I probably would have selected a different server, though since I do not do my due dilligence I am stuck with either figuring out how to make it work or giving up and trying another solution.
As I mentioned before, I am not one for giving up. I came to find out that the reason why ESXi does not like this server is due to the SCSI/SATA card that the two drives are plugged into by default. For those not familiar with this model it has a small back plane in the middle of the server that has a riser card plugged into it that supports PCI-X cards. One of the two slots contains a SATA 300 TX4 card which has a cable that plugs into the SCSI port on the mother board. ESXi does not work with drives that are connected to the server via a port or the backplane (at least that is my understanding and it is accurate in the case of this server). At this point in time all that I had mentioned was just an assumption. I needed a way to test it out and see if there was a way around it. We in looking at the mother board I found that it has two SATA ports on the board that the drives can plug into and bypass the backplane all together. Now I am not that familiar with all the features and functionality of this server yes so I am not sure yet if this is a good idea or not though I needed to test out a theory. Needless to say my assumption turned out to be correct. As soon as I changed the ports for those drives everything was working fabulously. I was able to boot up to the instance and I must say that I was a little disapointed. The interface has a lot to be desired. Say what you want about Microsoft but its interfaces are pretty funcitonal even though there may be some performance or security issues.
After configuring the VERY few options on the server I then flipped over to my desktop and browsed to the server (actually I set up a DNS entry for the server first in AD so that I can use a URL instead of an IP address). I downloaded the vSphere Client application and installed it and it all went smoothly. I then opened the vSphere Host Update Utility 4 (might as well make sure that everything is up-to-date). I was informed that there were some patches available, I downloaded them and installed them as easy as can be. After all my initial issues it almost seems to easy. I keep expecting something to go wrong, though so far so good. After the patches were applied the utility rebooted the ESXi server and everything came back up without any issues. I am still feeling like there is some impending doom awaiting me, maybe it is just the cynical IT guy always expecting the worst.
Next I opened the vSphere client application, logged onto the server and no errors or issues. The interface is nice and clean. Not a lot of clutter on it which is something that I like. So far so good. Currently it is 11:30 pm in the evening and even though I want to stay up and be nerdy I need to get some sleep. I will begin my foray into the world of creating vertual machines on the VM Server Tomorrow.
Good Night.
Day 2
Right now money is a little tight so I have been putting this decision off though things have been starting to get a little difficult in trying to access files that I need and having our desktop computers talk to each other and such. So I started looking around ebay and craig's list and I put together a list of potentials. Based upon features and I will admit company trust I purchased a slightly used HP DL145 G2 server. It has Two dual core opteron 2.2 ghz processors, 4 gb of memory and 1 tb of disk space. It only took 3 days for it to gether here. In fact it arrived this afternoon. Needless to say my I was a bit excited (I know I am a nerd).
Well, one of the decisions that I made when purchasing this server was that I would consolidate the two servers that I have (one working and the other not working) into one server using virtualization. I am a bit of a novice when it comes to this technology though we use it quite a bit at work. Since we use VMWare ESX as work I was leaning towards that solution though I hear XenServer is also very good (MS HyperVisor is still too new for me to want to deal with it). So after work today I downloaded ESXi 4, burned it to a disk and off I went.
After a couple of hours of frustration on why I could not get the thing working I started doing some research and playing around (I am not one to call it quites, I have to know why it was not working). Anyway, I came to find out that the server I bought is not on the hardware compatibility list for VMWare. If I had know that in the first place I probably would have selected a different server, though since I do not do my due dilligence I am stuck with either figuring out how to make it work or giving up and trying another solution.
As I mentioned before, I am not one for giving up. I came to find out that the reason why ESXi does not like this server is due to the SCSI/SATA card that the two drives are plugged into by default. For those not familiar with this model it has a small back plane in the middle of the server that has a riser card plugged into it that supports PCI-X cards. One of the two slots contains a SATA 300 TX4 card which has a cable that plugs into the SCSI port on the mother board. ESXi does not work with drives that are connected to the server via a port or the backplane (at least that is my understanding and it is accurate in the case of this server). At this point in time all that I had mentioned was just an assumption. I needed a way to test it out and see if there was a way around it. We in looking at the mother board I found that it has two SATA ports on the board that the drives can plug into and bypass the backplane all together. Now I am not that familiar with all the features and functionality of this server yes so I am not sure yet if this is a good idea or not though I needed to test out a theory. Needless to say my assumption turned out to be correct. As soon as I changed the ports for those drives everything was working fabulously. I was able to boot up to the instance and I must say that I was a little disapointed. The interface has a lot to be desired. Say what you want about Microsoft but its interfaces are pretty funcitonal even though there may be some performance or security issues.
After configuring the VERY few options on the server I then flipped over to my desktop and browsed to the server (actually I set up a DNS entry for the server first in AD so that I can use a URL instead of an IP address). I downloaded the vSphere Client application and installed it and it all went smoothly. I then opened the vSphere Host Update Utility 4 (might as well make sure that everything is up-to-date). I was informed that there were some patches available, I downloaded them and installed them as easy as can be. After all my initial issues it almost seems to easy. I keep expecting something to go wrong, though so far so good. After the patches were applied the utility rebooted the ESXi server and everything came back up without any issues. I am still feeling like there is some impending doom awaiting me, maybe it is just the cynical IT guy always expecting the worst.
Next I opened the vSphere client application, logged onto the server and no errors or issues. The interface is nice and clean. Not a lot of clutter on it which is something that I like. So far so good. Currently it is 11:30 pm in the evening and even though I want to stay up and be nerdy I need to get some sleep. I will begin my foray into the world of creating vertual machines on the VM Server Tomorrow.
Good Night.
Day 2
Subscribe to:
Posts (Atom)